AC Solenoid Water Pump DYX-SPS-02 provide plenty of raw power and pressure, fit for tight spaces. This water pump is mainly used for steam iron, steam cleaner, garment steamer, electrical steam mop, steam micro wave oven, portable air conditioner and coffee machine.
Product features:
- Self priming
- Small size
- Light weight
- Low cost
- Quite operation
- Safe, low voltage power supply
- Energy-saving and environmental
Technical Specification
Product model | DYX-SPS-02 |
Voltage/frequency | AC230V/50HZ |
Power | <=15W |
Water flow rate | 135~165g/min at 0 bar pressure |
Media | water |
Pressure | >=2.5bar |
Life test | >1000 hours (work for 1hour and stop for 30 mins as a cycle) |
Working temperature | 5℃~55℃ |
Product N.W | 73g |
Noise | <60dB (on a 5cm sponge, 30cm away from noise meter) |
Product use | Massager, vacuum package machine, vacuum blender, vacuum fresh keeping box |
Dimension Drawing
Mini Pumps and solenoid valves application
Composition and structure of mini solenoid water pump
Micro Solenoid Water Pump is a device that utilizes the principle of electromagnetic induction to transport liquids. This article will provide a detailed introduction to the composition and structure of the electromagnetic pump, mainly including the following eight aspects:
1. Magnets and coils
Magnets and coils are the core components of Small Solenoid Water Pumps. Magnets have the characteristic of attracting iron objects, while coils can generate varying magnetic fields. When the coil is connected when using alternating current, an alternating magnetic field is generated, which interacts with the magnet and causes it to vibrate. The interaction force between the coil and magnet realizes the liquid transportation of the body.
2. Pump casing
The pump casing is the casing of an Steam Cleaner Solenoid Pump, usually made of metal material. Its function is to protect the internal components of the electromagnetic pump, while also serving as a support and fixing base for the pump foundation. The shape and size of the pump casing vary according to different design requirements, but usually includes components such as inlet, outlet, and exhaust ports.
3. Pump cover
The pump cover is the top cover of an electromagnetic pump, usually made of metal material. Its function is to protect the internal mechanism, prevent liquid leakage, and act as both the shaft and shaft
Supporting and fixing the foundation. The shape and size of the pump cover are combined with the pump casing to form the enclosed space of the electromagnetic pump.
4. Shaft and bearings
The shaft and bearings are important rotating components in electromagnetic pumps. The function of the shaft is to transmit power, enabling the impeller to rotate; The function of bearings is to support and fix the shaft, similar to
It plays a role in lubrication and reducing friction. The material of shafts and bearings is usually steel or stainless steel, and the shape and size vary according to different design requirements.
5. Sealing ring
The sealing ring is one of the important components of an electromagnetic pump, and its function is to prevent liquid leakage. Sealing rings are usually made of wear-resistant materials, such as rubber. The shape and size of the sealing ring vary according to different design requirements, but it is usually circular or spiral. The sealing ring is installed on the shaft and rotates synchronously with the shaft, thus achieving liquid sealing.