$7.51000-99999 Piece/Pieces
$6.5≥100000Piece/Pieces
| Payment Type: | L/C,T/T,Paypal |
| Incoterm: | FOB,EXW,FCA,DDU,DDP,Express Delivery,CIF |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Shanghai,Ningbo |
Model No.: DQB432-A
Brand: DYX
Environment: 5℃ ~55℃
Media: Air
NW: 52
Current: <0.35A
Life Test: >1000 hours
Rated Voltage: DC13.5V
Product Model: DQB432-A
Noise Level: ≤37dB
Flow Rate: 4±1.0LPM
| Selling Units | : | Piece/Pieces |
| Package Type | : | Standard carton |
| Picture Example | : |
|
DQB432 is a small waist massage pump with DC12V integrated pump and valve for automobiles. Its flow rate is 4LPM and the pressure range is greater than or equal to 80KPA. This mini pump is usually used in automobile lumbar massage devices and can provide a comfortable massage effect by generating appropriate air pressure and flow. When used, it can be adjusted and controlled according to personal needs and preferences to meet different massage needs and experiences.
What is the lifespan of a Mini Air Pump in car massage?
The life of a Small DC Air Pump in car massage will be affected by many factors, such as the quality of the pump, frequency of use, working pressure, ambient temperature, etc. Generally speaking, high-quality micro air pumps can provide a long service life, but in high-frequency or harsh use environments, their lifespan may be affected. The safe life of DYX DQB432 micro air pump can reach more than 1800h.In order to extend the life of the Small Diaphragm Air Pump in car massage, it is recommended to regularly check and maintain the working status of the pump, including replacing worn parts, cleaning the air circuit, etc. In addition, long-term continuous use should be avoided to avoid overheating or damage to the pump. If the pump is found to be working abnormally or damaged, it should be repaired or replaced in time.
What are the factors that affect the life of a mini electric air pump in car massager ?
1. Pressure: The pressure of the Electric Air Pump has a certain impact on its life. Within a certain range, increasing the pressure can increase the working efficiency and output of the air pump, but excessive pressure can cause the air pump to be overloaded or damaged. Therefore, work pressure needs to be reasonably selected based on actual needs.
2. Flow rate: The flow rate of the portable electric air pump also affects its working efficiency and life. If the flow rate is too high or too low, the efficiency of the air pump may be reduced or damaged. Therefore, the flow rate needs to be reasonably selected based on actual needs.
3. Current: The current of the micro air pump also affects its life. Too high a current may cause the air pump to overheat or be damaged, while too low a current may cause the air pump to not work properly. Therefore, the current needs to be reasonably selected according to the specifications and requirements of the air pump.
4. Eccentric wheel: The eccentric wheel of the micro air pump is one of its core components. If the eccentric wheel is worn or malfunctions, it will affect the working efficiency and life of the air pump. Therefore, the working condition of the eccentric wheel needs to be checked and maintained regularly.
5. Rubber: The rubber parts of the small dc electric air pump also have a certain impact on its life. For example, if parts such as rubber pistons and rubber seals age or wear, they will cause air pump leakage or reduced efficiency. Therefore, the working condition of rubber parts needs to be checked and maintained regularly.
6. Motor: The motor of the micro air pump is one of its core components. If the motor fails or is damaged, it will affect the working efficiency and life of the air pump. Therefore, the working condition of the motor needs to be checked and maintained regularly.
Quick Detail:
| Voltage | DC13.5V | Power | 1.8W |
| Pressure | >90Kpa | Used fluid | Air |
| Noise | ≤37dB | Application | Car massage |
How is the life of a small Dc Air Pump affected by pressure, flow, current and other factors?
The life of the micro air pump is affected by pressure, flow, current and other factors as follows:1. Pressure: The working pressure of the micro air pump has a direct impact on its life. If the operating pressure is too high, it may cause the components of the air pump to be overloaded or damaged, thus shortening its service life. For example, excessive pressure may cause increased wear on the piston, cylinder liner and other parts of the air pump, or cause
Air pump seals fail prematurely.
2. Flow: The flow of the micro Membrane Air Pump also affects its working efficiency and life. If the flow rate is too large or too small, the working efficiency of the air pump may be reduced or damaged. Too much flow may cause excessive wear or heat to the air pump, while too little flow may cause the air pump to not work properly.
3. Current: The current of the electric air pump portable also affects its life. Too high a current may cause the air pump to overheat or be damaged, while too low a current may cause the air pump to not work properly. Too high a current may overload the air pump's motor, causing motor burnout or other failures, while too low a current may prevent the air pump from reaching its rated speed, thus affecting its working efficiency.
Maintenance precautions for micro air pumps include the following:
1. Cannot be used for a long time: The Small Air Compressor Pump cannot be used continuously for a long time, otherwise the temperature of the motor will be high and the magnetism will be weakened. It is recommended to use it intermittently, using it for about 20 minutes each time, and then shutting down for about 10 minutes to avoid excessive burden on the air pump caused by long-term continuous use.
2. Regular inspection: During use, it is necessary to regularly check the working status of the micro air pump, including parameters such as flow, pressure, noise, temperature, and whether the electrical connection is normal. If abnormal conditions are found, stop the machine immediately for inspection and repair.
3. Clean the air path: The air path of the dc air pump needs to be cleaned regularly to prevent dust, dirt or other impurities from affecting the work of the air pump. When cleaning, you can use special cleaning agents and tools and follow the instructions.
4. Replace wearing parts: Wearing parts of micro air pumps such as pistons, cylinder liners, eccentrics, etc. need to be inspected and replaced regularly. If wear or damage is found, it should be replaced in time to avoid greater damage to the air pump.
5. Keep it dry: The micro air pump should be kept dry and avoid working in a humid environment. If the operating environment has high humidity, corresponding moisture-proof measures should be taken, such as installing moisture-proof devices or using desiccants.
6. Avoid vibration: The micro air pump should avoid strong vibration or impact to avoid damage or loosening of components. During use, avoid moving or colliding with the micro air pump at will.
7. Regular maintenance: The micro air pump needs regular maintenance, such as changing lubricating oil, cleaning the body, etc., to maintain its good working condition and extend its service life.
Tel: +86-755-29537662
Whatsapp: +8613537810545
Address: No.21,Changlong East Road,Fu Cheng Ao Village,Pinghu Town,Longgang District,Shenzhen,China, Shenzhen, Guangdong China
Website: https://www.dyxpump.com
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now