How to repair a broken small water pump? Teach you simple repair methods

1. The reason why the Mini Water Pump is broken

There may be many reasons why small water pumps break down, and the most common reason is damage caused by prolonged non use. Below are several common reasons.

1. Excessive use or overload;

2. If used for too long, the sealing ring will age and break;

3. Foreign objects penetrate the water inlet pump;

4. The motor is damaged and the water pump cannot start normally.

2. Water pump repair method

The Mini Liquid Pump is broken, and we can take the following simple repair methods.

1. Clean the water pump

Firstly, we need to clean the water pump and remove debris such as garbage and mud from it. After cleaning the water pump, test run it to confirm if it can work properly.

2. Replace the sealing ring

The new sealing ring needs to be purchased according to the corresponding specifications of the water pump model. First, remove the old sealing ring, and then clean the installation site of the water pump. Install the new sealing ring onto the water pump, paying attention to the correct installation position and direction.

3. Replace the motor

If the above methods cannot solve the problem, it is necessary to check whether the motor is functioning properly. If the motor is damaged, you need to contact a professional or replace the motor.

4. Adjust the Mini Hydraulic Pump load.

If the load of the water pump is too large, it is necessary to reduce the load borne by the water pump to ensure its normal operation.